Red light therapy beret · 84 LEDs
A navy beret-style cap with 84 dual-chip LEDs, 660 nm red and 850 nm near-infrared light, five modes and an 1800 mAh battery controller.
- 25 × 16 × 14 cm · Navy denim
- 84 dual-chip LEDs · 660 nm + 850 nm
- 1800 mAh battery controller · Type-C · 5 V / 2 A
A short message is enough to start.
Overview
A navy denim beret with 84 dual-chip LEDs lining the crown. Each LED combines 660 nm red and 850 nm near-infrared light. The 1800 mAh battery controller attaches to the cap, so a session needs no cable, and from the outside it looks like an everyday flat cap. It suits hair-care and wellness ranges looking for a finished, ready-to-brand wearable.
Specifications
Standard configuration shown. Branding, packaging and some configuration details can be changed for your order — see Customization.
| Format | Rechargeable beret-style cap with an attached battery controller |
|---|---|
| Light configuration | 84 dual-chip LEDs · 660 nm red + 850 nm near-infrared |
| Light modes | Low · Medium · High · 10 Hz pulse · Breathing |
| Timer | 20 minutes with automatic shut-off |
| Battery | 1800 mAh Li-polymer controller · 6.66 Wh |
| Charging | Type-C · 5 V / 2 A (10 W) |
| Size | 25 × 16 × 14 cm |
| Material & color | Denim · navy |
| Net weight | 0.22 kg |
| Gross weight | 0.58 kg per set |
| Inner box | 31 × 21 × 6 cm |
| Outer carton | 63 × 45 × 29 cm · 20 sets · 12 kg |
Standard set: beret with battery controller, USB cable, English user manual, frosted storage bag and neutral color box with lid. Final accessories and packaging are confirmed in your quotation.
Looks like a flat cap
The LEDs sit on the inside of the crown, and the outer shell is plain navy denim, so the beret can be worn at home or on the move during a session.
- 84 dual-chip LEDs across the inner crown
- Denim shell · 25 × 16 × 14 cm · 0.22 kg
- Battery controller attached to the cap, with no cable during use
Battery controller
The controller holds an 1800 mAh Li-polymer battery and switches the cap between five settings. Each session runs for 20 minutes and then switches off automatically.
- Five settings: low, medium, high, 10 Hz pulse and breathing
- 20-minute session with automatic shut-off
- Type-C charging · 5 V / 2 A (10 W) · 6.66 Wh
Customization
Start from the current 84-LED configuration. Branding changes are the most direct route; changes to the electronics or LED layout go through engineering review and may need a new sample.
Branding & packaging
Logo on the cap and controller, labels, retail box, inserts and user manual in the languages of your market.
Shell & size
Fabric, color and size of the beret shell, confirmed on a sample before production.
Quantity & timing
MOQ and lead time depend on the configuration, packaging and component availability. We confirm both in your quotation, together with the sample schedule.
FAQ
Does the beret need a cable during use?
No. The attached 1800 mAh battery controller powers the LEDs. Recharge it through the Type-C port with the supplied USB cable.
How long is a session?
Each session runs for 20 minutes and the controller switches off automatically at the end.
Can I sell it under my own brand?
Yes. The beret and controller can carry your logo, with packaging and a user manual prepared for your target market.
What should I confirm before ordering?
Approve a sample of the exact configuration, then confirm the accessories, packaging, documents for your destination market and the quantity in your quotation.
This product is not intended to diagnose, cure or prevent disease. Read the supplied instructions before use.
Product inquiry
Tell us what you need.
About: Red light therapy beret · 84 LEDs
Your product selection and this page address will be included automatically.
Prefer email? info@lumetive.com